Ublox EVK-F9DR, Руководство пользователя

Страница: 5 / 33

EVK-F9DR - User guide
UBX-23007618 - R01 Introduction Page 5 of 33
C1-Public
1 Introduction
The EVK-F9DR can be used to test and evaluate all u-blox products based on the u-blox F9 multi-band
GNSS dead reckoning technology. The evaluation kit (EVK) is equipped with the ZED-F9K module pre-
flashed with the LAP 1.30 firmware, and allows out-of-the-box performance and feature evaluation of
the following products:
•
ZED-F9K
•
UBX-F9940-KA-DR
When re-flashed with DBD 1.30 firmware, the module may also be used to evaluate the following
products:
•
ZED-F9L
•
UBX-F9140-KA-DR
The built-in USB interface provides both power supply and a high-speed communication interface.
The EVK is compact and provides a flexible and user-friendly interface between the GNSS module and
test vehicles. Furthermore, it can be used with a notebook or PC running the GUI-driven u-center
application, making it the perfect companion through all stages of evaluation and design-in phases of
projects.
☞
EVK-F9DR is also equipped with a NEO-D9S L-band corrections receiver pre-flashed with PMP
1.04 firmware.
1.1 Highlights
•
Multi-constellation, multi-band GNSS
•
Automotive dead reckoning (ADR)
•
Real-time kinematic (RTK)
•
Configurable CAN interface
•
Dedicated pins for wheel tick and direction inputs
•
USB, UART, RS-232 connections
•
Battery-backed RAM (BBR) through micro-USB or CR2032 coin cell battery
•
Wake-on-Motion feature
1.2 Kit contents
•
EVK-F9DR unit
•
ANN-MB1 L1/L5 high-precision GNSS antenna with a 5-meter cable
•
1-meter USB-C cable
•
1.8-meter micro-USB cable
•
PointPerfect promotion card
1.3 System requirements
•
PC with Windows operating system
•
u-center GNSS evaluation software
•
Odometer input from a vehicle (for ADR only)