C93-M8E - User Guide
UBX-15031067 - R03
Early Production Information
Test Drives
Page 12 of 21
5
Test Drives
☞
Before testing can be done, make sure that the calibration has been completed according to
chapter 4.
We recommend recording and archiving the data of your test drives. You can enable additional debug
messages by clicking the Debug button, and then clicking the Record button (see Figure 7). When
prompted to poll for configuration, click “Yes” (see Figure 8).
Figure 7: The Debug and Record buttons are used for extra messages and debugging / post-analysis
Figure 8: Allow polling and storing of the receiver configuration into log file
