background image

 

C101-D9C - User guide 

UBX-21009111 - R02 

Document information

 

Page 2 of 17 

C1-Public  

 

Document information 

Title 

C101-D9C 

Subtitle 

Application board (rev. C) 

Document type 

User guide 

 

Document number 

UBX-21009111 

 

Revision and date 

R02 

17-Jan-2022 

Disclosure restriction 

C1-Public 

 

 

This document applies to the following products: 

Product name 

Type number 

Firmware version 

PCN reference 

C101-D9C 

C101-D9C-0-00 

FW QZS 1.01 

N/A 

 

 

u-blox or third parties may hold intellectual property rights in the products, names, logos and designs included in this 
document. Copying, reproduction, modification or disclosure to third parties of this document or any part thereof is only 
permitted with the express written permission of u-blox. 
The information contained herein is provided “as is” and u-blox assumes no liability for its use. No warranty, either express or 
implied, is given, including but not limited to, with respect to the accuracy, correctness, reliability and fitness for a particular 
purpose of the information. This document may be revised by u-blox at any time without notice. For the most recent 
documents, visit www.u-blox.com.  
Copyright © u-blox AG. 

Содержание C101-D9C


















Отзывы: