Ublox ANNA-B4 Series Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 74

Ublox ANNA-B4 Series Скачать руководство пользователя страница 50

ANNA-B4 series - System integration manual

UBX-21000517 - R03

Contents

Page 50 of 74

C1-Public

7

Qualifications and approvals

⚠

Approval for the ANNA-B4 module series is currently pending. For further information about the
current approval status, see

Country approvals

7.1

Country approvals

The ANNA-B4 module series is certified for use in the following countries/regions:

•

Europe (RED) *

•

USA (FCC) *

•

Canada (ISED) *

•

Japan (MIC) *

•

Taiwan (NCC) *

•

South Korea (KCC) *

•

Brazil (ANATEL) *

•

Australia and New Zeeland (ACMA) *

•

South Africa (ICASA) *

*

Country approval for ANNA-B4 module series is pending

7.2

European Union regulatory compliance

⚠

Approvals are pending

For information about the regulatory compliance of ANNA-B4 series modules against requirements
and provisions in the European Union, see also the ANNA-B4 Declaration of Conformity

Radio Equipment Directive (RED) 2014/53/EU

The ANNA-B4 series modules comply with the essential requirements and other relevant provisions
of Radio Equipment Directive (RED) 2014/53/EU.

Compliance with the RoHS directive

The ANNA-B4 series modules comply with the Directive 2011/65/EU (EU RoHS 2) and its amendment
Directive (EU) 2015/863 (EU RoHS 3).

7.3

FCC and IC compliance

⚠

Approvals are pending

This device complies with Part 15 of the FCC Rules and with ISED license-exempt RSS standard(s).

Caution

⚠

Any changes or modification NOT explicitly APPROVED by u-blox AG may invalidate the module
compliance against FCC rules part 15 and consequently void the user's authority to operate the
equipment.

«
...
48
49
50
51
52
...
»

Содержание ANNA-B4 Series











































































Отзывы:

Нет отзывов