Service status
WiFi phone service status
Turn on the phone by pressing the
END
key( ) during 2 seconds. It is displayed
“Booting Logo” Image on LCD.
After WiFi phone is booted completely, WiFi phone displays status corresponding to the
connection of WiFi network on LCD as figure [1] [2] [3].
The figure [1] shows WiFi phone did not connected with W-LAN AP. It shows on initial
stage status. If figure [1] is lasted over 20 sec, you have to check for
WiFi Profile
information of
Network
, also to check for W-LAN AP to work well. If
WiFi Profile
information is correct and
W-LAN AP
works well, then you need to reboot WiFi phone.
The figure [2] shows WiFi phone connected with W-LAN AP, but internet connection is
failed. You have to check for network such as DHCP/static IP configuration of
WiFi
Profile
function.
The figure [3] shows WiFi phone to try registering with SIP server. The WiFi phone is not
registered to SIP server but connected with W-LAN AP. You need to check for
configuration of
SIP Server
, also to check for user name, user number and user
password of
SIP Account
function .
When WiFi phone is registered to SIP server, it is displayed his own telephone number
on LCD. (page 22)
[1]
[2]
[3]
Standby
10