Connecting Power over Ethernet
Note:
PoE adapters are not included with the UVC-G3
5-pack. Multiple cameras may be powered by a UniFi
Switch using 24V passive PoE.
1. Connect the Ethernet cable from the camera to the POE
port on the PoE Adapter.
2. Connect an Ethernet cable from your LAN to the LAN port
on the PoE Adapter.
3. Connect the Power Cord to the PoE Adapter. Connect the
other end of the Power Cord to a power outlet.
Mounting the PoE Adapter (Optional)
1. Remove the PoE Mounting Bracket from the adapter, place
the bracket at the desired location, and mark the two holes.
2. Pre-drill the holes if necessary, and secure the bracket
using two fasteners (not included).
3. Align the mounting slots on the adapter with the mounting
tabs on the bracket, and then slide the adapter down.
*640-00175-04*
640-00175-04
