Ubiquiti USW--Pro--48, Быстрый старт

Страница: 3 / 13

RJ45 (Ports 1 ­ 48)
SFP+ (Ports 49 ­ 52)
Reset Button
USP LED
USP Connect DC Input
Power Port
Off No Link
Green
Link Established at 1 Gbps
Flashing Indicates Activity
White
Link Established at 10 Gbps
Flashing Indicates Activity
RJ45 ports support 10/100/1000 Ethernet connections.
Hot­swappable SFP+ ports support 1/10 Gbps connections.
This button serves two functions for the UniFi Switch:
Restart Press and release the Reset button quickly.
Restore to Factory Default Settings Press and hold the Reset button for
more than five seconds.
The LED lights up blue when there is an active power connection on the USP
DC input.
This DC input provides redundant power when the UniFi Switch is connected to
the UniFi SmartPower Redundant Power System, model USP­RPS, via the
USP Cable (not included). If there is an AC power loss or internal power supply
failure, the UniFi Switch will draw power from the USP­RPS instead.
Connect the included Power Cord to the Power port.
Installation Requirements
Phillips screwdriver
Standard­sized, 19" wide rack with a minimum of 1U height available
For indoor applications, use Category 5 (or above) UTP cabling approved for
indoor use.