Reset
WAN 1 Port
LAN 1 Port
WAN 2 / LAN 2 Port
System LED
Power LED
connect the Console port to your computer. Then con gure using the following settings:
Baud rate 115200
Data bits 8
Parity NONE
Stop bits 1
Flow control NONE
Resets to factory defaults. The UniFi Gateway should be powered on. Press and hold the Reset
button for about 10 seconds until the right LED on the WAN 2 / LAN 2 port starts ashing and
then becomes solidly lit. After a few seconds, the LED will turn off, and the UniFi Gateway will
automatically reboot.
Supports 10/100/1000 Ethernet WAN connections. Default setting is DHCP client.
Supports 10/100/1000 Ethernet LAN connections. Default setting is DHCP Server.
Server IP: 192.168.1.1/24
Supports 10/100/1000 Ethernet connections. Con gure the port using the UniFi Gateway
con guration interface.
LEDs
for detailed descriptions.
Off
Power Off
USG Quick Start Guide
×
Click for
Table of Contents
