Ubiquiti UniFi UBB, Руководство пользователя

Страница: 6 / 36

Reset Button
Ethernet Port
the UBB devices are properly aligned, the LED will
turn green.
Note: If the other bridge device is within
range and the UBB LED is green and red,
we recommend moving the UBB device up
or down until the LED is green.
Resets to factory defaults. The device should be running after bootup is complete.
Press and hold the Reset button for about 10 seconds until the LED starts flashing
and then becomes solidly lit. After a few seconds, the LED will turn off, and the
device will automatically reboot.
Note: The UBB radios are pre-paired. If a link is lost due to configuration
changes, you can reset both UBB radios to re-establish the link.
Local UBB radio (source LAN) This Gigabit Ethernet port is used to connect the
power and should be connected to the LAN and DHCP server.
Remote UBB radio (bridged LAN) This Gigabit Ethernet port is used to connect the
power and should be connected to the LAN. It will receive its IP address from the
DHCP server via the wireless link to the local UBB radio.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD