Ubiquiti UniFi nanoHD, Быстрый старт

Страница: 19 / 26

Connecting to a PoE Switch
Connect the Ethernet cable from the UniFi AP directly to an 802.3af-compliant port
on the switch.
Connecting to the PoE Adapter
1. Connect the Ethernet cable from the device to the POE port of the PoE adapter.
2. Connect an Ethernet cable from your LAN to the LAN port of the PoE adapter.
3. Connect the Power Cord to the adapter, and then plug the Power Cord into a
power outlet.
Mounting the PoE Adapter (Optional)
1. Remove the PoE Mounting Bracket from the adapter, place the bracket at the
desired location, and mark the two holes.
2. Pre-drill the holes if necessary, and secure the bracket using two fasteners (not
included).
3. Align the adapter’s slots with the tabs of the PoE Mounting Bracket, and then slide
the adapter down.
UAP-nanoHD Quick Start Guide