Introduction
Thank you for purchasing the Ubiquiti Networks® UniFi®
802.11ac Wave 2 Enterprise Access Point. This Quick Start
Guide is designed to guide you through installation and
includes warranty terms.
IMPORTANT:
The UAP-nanoHD requires the UniFi
Controller v5.7 or higher, available at:
www.ubnt.com/download/unifi
Package Contents
UniFi nanoHD AP
Mounting Bracket
Ceiling Backing
Plate
Screws
(Qty. 4)
Flat Head Screws
(Qty. 4)
Keps Nuts
(Qty. 4)
Screw Anchors
(Qty. 4)
Gigabit PoE* (48V, 0.5A)
with Mount Bracket
Power Cord*
* Included only in the single-pack of the UAP-nanoHD
TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above). It is the professional
installer’s responsibility to follow local country regulations, including operation within legal
frequency channels, output power, indoor cabling requirements, and Dynamic Frequency
Selection (DFS) requirements.
