background image

Limited Warranty

www.ubnt.com/support/warranty/
The limited warranty requires the use of arbitration to resolve disputes on
an individual basis, and, where applicable, specify arbitration instead of
jury trials or class actions.

Compliance

FCC

Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions.
1.  This device may not cause harmful interference, and
2.  This device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in 
a residential installation. This equipment generates, uses and can radiate 
radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a partic
ular installation. If this equipment does cause harmful interference to radio 
or television reception, which can be determined by turning the equip
ment off and on, the user is encouraged to try to correct the interference 
by 
one or more of the following measures:

-

 Reorient or relocate the receiving antenna.

-

 Increase the separation between the equipment and receiver.

-

 Connect the equipment into an outlet on a circuit different from that to 

which the receiver is connected.

-

 Consult the dealer or an experienced radio/TV technician for help.

This radio transmitter (FCC ID: SWX‑UDM) has been approved by FCC.

ISED Canada

CAN ICES‑3(B)/NMB‑3(B)

This device complies with ISED Canada licence‑exempt RSS standard(s).
Operation is subject to the following two conditions:
1.  This device may not cause interference, and
2.  This device must accept any interference, including interference that

may cause undesired operation of the device.

This radio transmitter (IC: 6545A‑UDM) has been approved by ISED Canada.
The device for operation in the band 5150‑5250 MHz is only for indoor
use to reduce the potential for harmful interference to co‑channel mobile
satellite systems.

satellite systems.

Содержание UDM
















Отзывы: