LED
Shutdown Button
Ethernet Port
Reset Button
USB Type C Power Port
microSD Slot
White
Factory defaults.
Flashing White
Initializing.
Alternating White/Blue
Device is busy; do not touch or unplug it. This
usually indicates that a process such as a
firmware upgrade is taking place.
Blue
Device is working properly.
Press the Shutdown button to initiate a graceful shutdown (all services will be
shut down and the CPU will remain active). After pressing the button, wait until
the LED goes off, and then unplug the Cloud Key.
This Gigabit Ethernet port is used to connect the power and should be
connected to the LAN and DHCP server. Power can be provided by an 802.3af
PoE switch, such as the UniFi PoE Switch.
The Reset Button serves two functions:
Restart
Press and release the Reset button quickly.
Restore to Factory Default Settings
Press and hold the Reset button for
more than five seconds.
Optional power source (5V, minimum 1A) if PoE is not available.
This slot is used to back up the Cloud Key configuration to the microSD card