RF Exposure Warning
The antennas used for this transmitter must be installed to provide a
separation distance of at least 29 cm from all persons and must not be
located or operating in conjunction with any other antenna or transmitter,
except as listed for this product’s certification.
Les antennes utilisées pour cet émetteur doit être installé pour fournir une
distance de séparation d’au moins 29 cm de toutes les personnes et ne doit
pas être situé ou opérant en conjonction avec une autre antenne ou un
autre émetteur, sauf dans les cas énumérés à la certification de ce produit.
Australia and New Zealand
Warning: This is a Class A product. In a domestic environment this
product may cause radio interference in which case the user may
be required to take adequate measures.
CE Marking
CE marking on this product represents the product is in compliance with all
directives that are applicable to it.
Country List
AT BE BG CY CZ
DE DK EE EL ES
FI
FR HR
HU
IE
IT
LV LT
LU MT NL PL
PT RO
SE
SI
SK
UK
BFWA (Broadband Fixed Wireless Access) members noted in blue
Note:
This device meets Max. TX power limit per ETSI regulations.
The following apply to products that operate in the 5 GHz frequency range:
Note:
This device is restricted to indoor use only when operating
in the 5150 - 5350 MHz frequency range within all member states.
Note:
All countries listed may operate at 30 dBm. BFWA member
states may operate at 36 dBm.
Note:
Operation in the 5.8 GHz frequency band is prohibited in
BFWA member states. Other countries listed may use the 5.8 GHz
frequency band.
