Connecting to a PoE Switch
Connect the Ethernet cable from the UniFi AP directly to a PoE
port on an 802.3af switch. PoE will automatically be enabled.
1 3
5
7
9
1
1 1
3 1
5 1
7 1
9 2
1 2
2
2 4
6
8
1
0 1
2 1
4 1
6 1
8 2
0 2
2 2
4
SPF1
SPF2
Connected to UniFi Switch, model US-24-250W
Note:
The UAP-AC-M supports 802.3af/A PoE and 24V
Passive PoE. It does NOT support 802.3af/B PoE and
therefore does not work with 802.3af/B switches.
Wireless Adoption
See the Wireless Adoption Requirements section before
proceeding.
1. Ensure the UniFi AP is powered on, and then launch the
UniFi Controller software.
2. Go to the Devices page, and the UAP-AC-M will show up as
Pending Adoption (Wireless).
3. Click Adopt.
For information on configuring and using the UniFi Controller
software, refer to the User Guide located on our website:
www.ubnt.com/download/unifi
