Introduction
Thank you for purchasing the Ubiquiti Networks® UniFi® AP.
This Quick Start Guide is designed to guide you through
installation and includes warranty terms.
IMPORTANT:
The UAP-AC-LITE requires the UniFi Controller
v4.7 or higher, available at: downloads.ubnt.com/unifi
Package Contents
UniFi AP AC Lite
Mounting Bracket
Ceiling Backing Plate
Flat Head Screws
(M3x50, Qty. 4)
Keps Nuts
(M3, Qty. 4)
Screws
(M2.9x20, Qty. 4)
Screw Anchors
(M3x20, Qty. 4)
802.11ac Dual Radio
Access Point
Model: UAP-AC-LITE
Gigabit PoE* (24V, 0.5A)
with Mounting Bracket
Power Cord*
Quick Start Guide
* Included only in the single-pack of the UAP-AC-LITE.
Installation Requirements
• CAT5/6 cable
• Phillips screwdriver
• Drill and drill bit (6 mm for wall-mounting or 3 mm for
ceiling-mounting)
• Optional: Drywall or keyhole saw (to cut 18 mm hole for
Ethernet cable feed)
TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above). It is the customer’s
responsibility to follow local country regulations, including operation within legal frequency
channels, output power, indoor cabling requirements, and Dynamic Frequency Selection
(DFS) requirements.
