13. Each M10x100 Bolt includes a washer, spring lock washer,
and nut. Remove these and use them to secure the bolts
when assembling.
14. Attach the Stabilizer Brackets to the pole just beneath the
area where the RocketDish will be attached.
Note:
The mounting assembly can accommodate a
Ø 1.5" - 4.0" pole.
a. Place one Stabilizer Bracket on each side of the pole.
b. Insert the two M10x100 Bolts into the Stabilizer Brackets.
c. Secure each M10x100 Bolt with one washer, one spring
lock washer, and one nut.
d. Tighten the nuts to approximately 50 N-m (37 lb-ft).
