7. Fit the rubber gasket over the Ethernet cable, and then
slide the gasket into the port cover.
8. Place the magnetic GPS Antenna on a steel surface near the
PrismStation.
Note:
Ensure that the GPS Antenna has clear line of
sight to the sky for proper GPS reception.
9. Connect the power using one of the following options:
• Using the included Gigabit PoE Adapter: Go to
Connecting to the PoE Adapter.
• Using a separate PoE switch: Connect the Ethernet
cable from the PrismStation’s Ethernet port to a
PoE-enabled Ethernet port on the switch.
WARNING:
The switch port must comply with the
power specifications listed in the Specifications
section of this Quick Start Guide.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
