Power
Signal
Main Ethernet
Secondary Ethernet
The Power LED will light blue when the device is connected to a power
source.
In airOS®, you can modify the threshold value for the wireless signal strength
LEDs on the Wireless tab under Signal LED Thresholds. The LED will light
when the wireless signal strength is equal to or greater than the LED’s
threshold value. The default threshold values for these LEDs are shown below:
The LED will light steady blue when an active Ethernet connection is made to
the Main/LAN port and flash when there is activity.
The LED will light steady blue when an active Ethernet connection is made to
the Secondary port and flash when there is activity.
Hardware Installation
1.
NS-5AC Quick Start Guide
NS-5AC Quick Start Guide
https://dl.ui.com/qsg/NS-5AC/NS-5AC_EN.html
4 di 16
01/03/2023, 09:10
