25.02.2020
NBE-5AC-Gen2 Qu ck Start Gu de
https://dl.ubnt.com/qsg/NBE-5AC-Gen2/NBE-5AC-Gen2_EN.html
3/18
Ma n Ethernet Port
Reset Button
Secondary Ethernet Port
Power LED
Ma n LED
LAN2 LED
S gnal LEDs
Th s G gab t Ethernet port s used to connect the power and should be connected to
the LAN and DHCP server.
To reset to factory defaults, press and hold the Reset button for more than 10
seconds wh le the dev ce s powered on. Alternat vely, the dev ce may be reset
remotely v a a Reset button located on the bottom of the G gab t PoE Adapter.
Th s G gab t Ethernet port prov des passthrough PoE to power and connect a 24V
pass ve PoE dev ce to the network.
Note:
In order to use PoE Passthrough on the Secondary port, a 24V, 1A
PoE adapter s requ red.
The Power LED w ll l ght blue when the dev ce s connected to a power source.
The LED w ll l ght steady blue when an act ve Ethernet connect on s made to the
Ma n port and ash when there s act v ty.
The LED w ll l ght steady blue when an act ve Ethernet connect on s made to the
LAN2 port and ash when there s act v ty.
In a rOS®, you can mod fy the threshold value for the w reless s gnal strength LEDs
on the W reless tab under S gnal LED Thresholds. Each LED w ll l ght when the
NBE-5AC-Gen2 Qu ck Start Gu de
All manuals and user guides at all-guides.com
