4.
Enter your Wi-Fi security credentials. The options that
appear are based on the encryption method used on your
Wi-Fi network.
5.
Enter your mFi Controller settings:
•
Address
The IP address and http port used by
the Controller. (The port is usually 6080, for
example:
1.1.1.1:6080
or
mfi.acme.com:6080
).
•
User
The username used to log in to the
Controller.
•
Password
The password used to log in to the
Controller.
Note:
Remove the
Controller
checkmark if you need
to enter the Controller settings later. This can be
done via the embedded UI or layer 2 adoption.
6.
Click
Apply
.
7.
A flashing yellow checkmark will appear while the
mFi Switch is attempting to connect to the Wi-Fi network.
It will appear green once the mFi Switch is connected.
www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
