Power LED
Management Port
Reset Button
Data Port
Random Flash
Ethernet Activity
Off
No Power
On
Powered On
Port not used.
To reset to factory defaults, press and hold the Reset button for more than 10
seconds while the device is powered on.
Gigabit PoE port for handling all user traffic and powering the device. Default
IP address: 192.168.1.20
Installation Overview
We recommend that you configure your LTU-Rocket radio before site installation.
The following sections provide detailed installation instructions. Perform these
instructions in the sequence given.
Connecting Power over Ethernet
1.
2.
Содержание LTU-Rocket
