Hardware Overview
Back Panel
LEDs
Reset Button
USB-C Port
Reset Button
To reset to factory defaults, press and hold the Reset button for
more than 10 seconds while the device is powered on.
USB-C Port
Reserved for future use.
LEDs
5 GHz
5 GHz
The LED will light blue when the 5 GHz link
is active.
GPS
GPS
The LED will light blue when the GPS signal
strength is sufficient. This requires a minimum of
three satellite connections.
UNMS
The center LED will light when there is a
connection to the Ubiquiti® Network Management
System (UNMS
™
) server.
LAN
The LED will light steady blue when an active
Ethernet connection is made to the Ethernet port
and flash when there is activity.
Power
The LED will light blue when the device is
connected to a power source.
Содержание LTU LR
