Port Compartment
Ethernet Port
Reset Button
Power LED
Ethernet LED
LEDs
Power
The Power LED will light blue when the
device is connected to a power source.
Ethernet
The Ethernet LED will light steady blue
when an active Ethernet connection is made and
flash when there is activity.
Button
Reset Button
To reset to factory defaults, press and hold the
Reset button for more than 10 seconds while the LiteBeam is
already powered on. Alternatively, the LiteBeam may be reset
remotely via a Reset button located on the bottom of the
Gigabit PoE Adapter.
Port
Ethernet Port
The Gigabit Ethernet port is used to connect
the power and should be connected to the LAN.
