Hardware Overview
LED
Reset
Magnetic
Base
LED
The LED will flash blue during bootup. When the camera
is ready to connect to the Wi-Fi network, the LED pattern
will flash two times accompanied by two beep tones. Once
connected to the network, the LED will glow a breathing
pattern.
State
Status
Flashing Blue
Device is Booting Up
Steady Blue
Connected to NVR
Flashing White
Connecting to Wi-Fi
Steady White
Ready for Configuration
Flashing Red
Cannot Connect to NVR
Steady Red
No Wi-Fi Connection
Reset
To reset network settings to factory defaults, press and
hold the Reset button until the camera emits two fast tones.