Wall-Mounting
To mount the EdgeSwitch on a wall:
1. Use a 6 mm drill bit to drill two holes 60 mm apart.
2. Insert the Anchors into the holes.
3. Use a Phillips screwdriver to secure a Screw to each anchor.
Leave a clearance of approximately 3 mm between each
screw head and its anchor.
60 mm
3 mm
Note:
You can also mount the EdgeSwitch in a
horizontal orientation.
4. Position the wall-mount slots of the EdgeSwitch over the
screw heads on the wall. Then slide the EdgeSwitch to the
left to lock it into place.
