6. Change the IP Address to a unique IP address. Click Apply.
Note:
If you change the IP settings, then the session will be cut off, and you will
need to reconnect to the device using the new IP address.
Customize additional settings as needed. For 24V Passive PoE configuration, refer to
. For more information, refer to the EdgeSwitch
documentation, which is available at
Configuring PoE Settings
The PoE setting for port 8 is set to Off by default.
WARNING:
Before activating PoE, ensure that the connected device supports
passive PoE and the supplied voltage.
On the Dashboard tab, click the PoE setting of port 8. Then select 24V.