Ubiquiti EdgeSwitch 5XP Скачать руководство пользователя страница 10

ES-5XP

Data Ports

Off/24V

LEDs Per Port

Management Port

Power/Link

Data Ports

PoE, Speed/Link/Activity

Networking Interfaces

Management Port

(1) 10/100 Ethernet Port

Data Ports

(5) 10/100/1000 Ethernet Ports

Operating Temperature

-25 to 55° C

(-13 to 131° F)

Operating Humidity

90% Noncondensing

Certi cations

CE, FCC, IC

Safety Notices

1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories speci ed by the manufacturer.

WARNING:

 Failure to provide proper ventilation may cause  re hazard. Keep at least 20 mm of

clearance next to the ventilation holes for adequate air ow.

WARNING:

 To reduce the risk of  re or electric shock, do not expose this product to rain or

moisture.

WARNING:

 Do not use this product in location that can be submerged by water.

WARNING:

 Avoid using this product during an electrical storm. There may be a remote risk of

electric shock from lightning.

Electrical Safety Information

1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the

manufacturer’s label. Connection to a different power source than those speci ed may result in

improper operation, damage to the equipment or pose a  re hazard if the limitations are not followed.

2. There are no operator serviceable parts inside this equipment. Service should be provided only by a

quali ed service technician.

3. This equipment is provided with a detachable power cord which has an integral safety ground wire

intended for connection to a grounded safety outlet.

a. Do not substitute the power cord with one that is not the provided approved type. Never use an

adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire.

b. The equipment requires the use of the ground wire as a part of the safety certi cation, modi cation

or misuse can provide a shock hazard that can result in serious injury or death.

c. Contact a quali ed electrician or the manufacturer if there are questions about the installation prior

to connecting the equipment.

d. Protective earthing is provided by Listed AC adapter. Building installation shall provide appropriate

short-circuit backup protection.

e. Protective bonding must be installed in accordance with local national wiring rules and regulations.

ES-5XP Quick Start Guide

Содержание EdgeSwitch 5XP













Отзывы: