3. Launch your web browser. Type the appropriate IP address in the address field
(192.168.1.20 is the default fallback IP address). Press enter (PC) or return (Mac).
4. Enter ubnt in the Username and Password fields. Click Sign In.
5. The EdgeSwitch Configuration Interface will appear. Click the System Settings
tab.
6. Change the IP Address to a unique IP address. Click Apply.
Note:
If you change the IP settings, the session will be cut off, and you will
need to reconnect to the EdgeSwitch using the new IP address.
Customize additional settings as needed. For 24V Passive PoE configuration, refer to
. For more information, refer to the EdgeSwitch
documentation, which is available at
Configuring PoE Settings
The PoE setting for ports 1-8 is set to Off by default.
WARNING:
Before activating PoE, ensure that the connected device
supports passive PoE and the supplied voltage.
On the Dashboard tab, click the PoE setting of the Ethernet port you want to
configure. Then select 24V.
UISP Management
You can manage your device using UISP, which lets you configure, monitor, upgrade,
and back up your devices using a single application. Get started at
Specifications
ES-10XP
Dimensions
207 x 31.1 x 90 mm (8.15 x 1.22 x 3.54")
Weight
500 g (1.10 lb)
Total Non-Blocking Throughput
10 Gbps
Switching Capacity
20 Gbps
Forwarding Rate
14.88 Mpps
Max. Power Consumption
(Excluding PoE Output)
8W
Power Method
24VDC, 2.5A
Supported Voltage Range
9 - 30VDC, 5A
ES-10XP Quick Start Guide
