Ubiquiti EdgeRoutrer LITE, Быстрый старт, Страница: 5 / 20

Front Panel Button
Reset
Button Description
Reset
There are two methods to reset the
EdgeRouter Infinity to factory defaults:
• Runtime reset (recommended) The
EdgeRouter Infinity should be running
after bootup is complete. Press and hold
the Reset button for about 10 seconds
until the LED of port eth0 starts flashing
and then becomes solidly lit. After a few
seconds, the LED will turn off, and the
EdgeRouter Infinity will automatically
reboot.
Note: To press the Reset button,
insert a straightened paper clip (or
similar object) into the hole shown
above. Do not use an object that
can break and become lodged in
the hole.
• Power-on reset Disconnect the Power
Cords from the EdgeRouter Infinity.
Press and hold the Reset button while
connecting the Power Cords to the
EdgeRouter Infinity. The port LEDs will
light up in sequential order. Keep holding
the Reset button until the LED on the
last port starts flashing, and then release
the button.