Front Panel Button
Reset
Button
Description
Reset
There are two methods to reset the
EdgeRouter PRO to factory defaults:
• Runtime reset (recommended) The
EdgeRouter PRO should be running
after bootup is complete. Press and hold
the Reset
button for about 10 seconds
until the right LED on RJ45 port eth7
starts flashing and then becomes solidly
lit. After a few seconds, the LED will
turn off, and the EdgeRouter PRO will
automatically reboot.
• Power-on reset Disconnect the Power
Cord from the EdgeRouter PRO. Press and
hold the Reset button while connecting
the Power Cord to the EdgeRouter PRO.
Keep holding the button until the right
LED on RJ45 port eth7 starts flashing and
then stops flashing after a few seconds.
https://arttel.ru/shop/marshrutizatory/ubiquiti-edgerouter-pro
