Ubiquiti edgepoint r6, Быстрый старт

Страница: 14 / 28

Connecting to Power
Either the VDC input or PoE input is used at any one time. If both
input types are connected, only the input type with the highest
voltage will be used; the other can be used as a backup. Follow the
appropriate instructions for your installation:
Connecting to the 24VDC Input
1. Wire one end of the DC power cable to the VDC terminal block.
2. When you are finished, replace the port cover.
Optional: You can use an M4x6 set screw (not included) to
secure the port cover.
3. Wire the other end of the cable to a DC power supply. (Wiring
will depend on your device.)
4. Connect the DC power supply to its power source.
12
EdgePoint EP‑R6 Quick Start Guide