18.02.2020
AF-24 Qu ck Start Gu de
https://dl.ubnt.com/qsg/AF-24/AF-24_EN.html
20/26
b. Sweep the Elevat on (EL) Adjustment Bolt of the Master through ts adjustment
range.
Note:
If the LED D splay nd cates an overload cond t on
, refer to the
a rF ber AF-24 User Gu de at:
F ne-Tun ng the L nk
The Az muth (AZ) and Elevat on (EL) Adjustment Bolts of the Al gnment Bracket adjust
the az muth and elevat on w th n a range of ±10°. For accurate al gnment, make
adjustments on one end of the l nk wh le the other nstaller reports the rece ved s gnal
level at the other end of the l nk. Do NOT make s multaneous adjustments on the
Master and Slave.
1.
Slave
Adjust the az muth and elevat on of the Slave unt l the other nstaller sees the
strongest rece ved s gnal level d splayed on the LED D splay of the Master.
2.
Master
Adjust the az muth and elevat on of the Master unt l the other nstaller sees
the strongest rece ved s gnal level d splayed on the LED D splay of the Slave.
AF-24 Qu ck Start Gu de
