background image

15

Safety Notices

Safety Notices

1. 

Read, follow, and keep these instructions.

2. 

Heed all warnings.

3. 

Only use attachments/accessories specified by the manufacturer.

WARNING:

 Do not use this product in location that can be 

submerged by water. 

WARNING:

 Avoid using this product during an electrical storm. 

There may be a remote risk of electric shock from lightning. 

Electrical Safety Information

1.  Compliance is required with respect to voltage, frequency, and current 

requirements indicated on the manufacturer’s label. Connection to a 
different power source than those specified may result in improper 
operation, damage to the equipment or pose a fire hazard if the 
limitations are not followed.

2.  There are no operator serviceable parts inside this equipment. Service 

should be provided only by a qualified service technician.

3.  This equipment is provided with a detachable power cord which has 

an integral safety ground wire intended for connection to a grounded 
safety outlet.

a.  Do not substitute the power cord with one that is not the provided 

approved type. Never use an adapter plug to connect to a 2-wire 

outlet as this will defeat the continuity of the grounding wire. 

b.  The equipment requires the use of the ground wire as a part of the 

safety certification, modification or misuse can provide a shock 

hazard that can result in serious injury or death.

c.  Contact a qualified electrician or the manufacturer if there are 

questions about the installation prior to connecting the equipment.

d.  Protective earthing is provided by Listed AC adapter. Building 

installation shall provide appropriate short-circuit backup 

protection.

e.  Protective bonding must be installed in accordance with local 

national wiring rules and regulations.

Содержание airMAX airGrid M5HP





























Отзывы: