2. Remove the nut from the ground bonding point located on
the back of the airFiber radio.
Ground
Bonding Point
3. Attach a ground wire (min. 10 AWG or 5 mm
2
) to the lug
and replace the nut to secure the wire.
4. At the installation site, secure the other end of the ground
wire to a grounded mast, pole, tower, or grounding bar.
WARNING:
Failure to properly ground your
airFiber radio will void your warranty.
Note:
The ground wire should be as short as
possible and no longer than one meter in length.
