4
airCam
™
Mini
LEDs
Ethernet
The Ethernet LED will light steady green
when an active Ethernet connection is made and
flash when there is activity.
Power
The Power LED will light steady orange
when the airCam is connected to a power source.
Note:
LED operation may be disabled using the
Camera Configuration Interface.
Hardware Installation
Your airCam Mini is pre‑assembled at the factory and is
Plug‑and‑Play ready. The camera can be placed on any
stable surface or mounted on a wall using the included Wall
Mount Bracket.
Wall Mount Installation (Optional)
1. Position the Wall Mount Bracket at the desired location
on the wall. Mark the location of the hole, and drill the
hole with a 6 mm drill bit.