5
Chapter 3: Using the Camera Configuration Interface
Ubiquiti Networks, Inc.
airCam
™
Dome User Guide
•
Services
The
Services
tab covers the configuration of
system management services including Ping Watchdog,
SNMP Agent, Web Server, SSH Server, Telnet Server,
NTP Client, Dynamic DNS, and System Log. For detailed
information, refer to
“Services Tab” on page 16
.
•
System
The
System
tab contains controls for the airCam
Dome Device Settings, Date Settings, System Accounts,
Configuration Management and Device Maintenance.
For detailed information, refer to
“System Tab” on page
19
.
Tools
The camera configuration interface also contains network
utility tools including:
•
Ping
•
Traceroute
Network Utility Tools
Ping
The
Ping
tool is used to check the preliminary link quality
and packet latency estimation between two network
devices using ICMP packets.
Network Ping
Select Destination IP
A remote system IP can be selected
from the list which is generated automatically or can be
specified manually.
Packet Count
Enter the number of packets to send for
the ping test.
Packet Size
The size of the ICMP packets can be specified
in this field.
Start
The test is started using this button.
Packet loss statistics and latency time evaluation is
provided after the test is completed.
Traceroute
The
Traceroute
tool allows tracing the hops from the
device to a selected outgoing IP address. It should be used
for finding the route taken by ICMP packets across the
network to the Destination host.
Destination Host
Enter the IP address of the destination
host to which you want to find the route.
Resolve IP Addresses
Resolution of the IP addresses
(symbolically rather than numerically) can be enabled by
selecting this option.
Start
The test is started using this button.
