Hardware Installation
IMPORTANT:
Handle the Dish Reflector with care.
Deformations to its shape may degrade performance.
1. The Dish Reflector and Antenna Feed are keyed so the
Antenna Feed can only be installed in a single orientation.
Attach the Antenna Feed to the Dish Reflector in the
following steps:
a. Line up the alignment pin on the Dish Reflector with the
hole on the Antenna Feed.
b. Fasten the Antenna Feed to the Dish Reflector using the
four M4 Bolts.
c. Tighten the four M4 Bolts.
M4 Bolts
IMPORTANT:
Do not handle the antenna by the Antenna
Feed once the feed is connected.
