Pole‑Mounting
1. Attach the Azimuth Support Brackets to the pole just
beneath the area where the airFiber radio will be attached.
Note:
The mounting assembly can accommodate a
Ø 38.1 ‑ 101.6 mm (1.5" ‑ 4.0") pole.
a. Orient the Azimuth Support Brackets around the pole so
it is aimed in the direction of the other airFiber radio.
b. Slide the open slot of the Azimuth Support Bracket over
the corresponding Small Carriage Bolt.
c. Tighten the Serrated Flange Nuts to approximately
50 N · m.
*640-00259-02*
640-00259-02