Ubiqconn VT1020, Руководство пользователя

Страница: 26 / 70

25
enable the defrost function and allow the device to heat up the screen to 2 degrees. The defrost
function is automatically shuts off once the temperature reaches 2 degrees.
Enabling Defog Function
In environments where an extreme temperature changes occurs, cold to hot temperature
change, the display can fog up. To enable the defog function, press the button to enable
the function. The device heats up to 35 degrees. Once the 35 degree temperature is achieved,
the function automatically shuts off.
Notes: Once the device reaches 35 degrees, the function automatically shuts off. Pressing the
Defrost/Defog key does not re-enable the function.
Calibrating the Touch Screen
The touch screens of all VT1020 devices that come delivered with an operating system
(Windows or Linux) are already calibrated.
You may need to calibrate your screen if you tap on one area and it registers in a different area
of the screen. Make sure you use the stylus to complete the alignment process.
1.
Tap Start > All Programs > HIDeGalaxTouch Tool > HIDeGalaxTouch Tool . The
HIDeGalaxTouch Tool appears.
2. Tap 4 Points Calibration, 9 Points Linearization or 25 Points Linearization to begin the
process. The calibration process beings and calibration points are displayed on the screen.
3. Tap each calibration point as directed by the process.
4. Tap and hold until the display shows OK.
5. Continue to follow the instructions until the process is finished.
6. Once calibration is achieved a prompt displays. Tap OK to complete the calibrate process.