Ubiqconn T70C, Руководство пользователя, Страница: 29 / 56

Press the Power/Resume button to start your system and check that if
the Power LED turns on.
After a few seconds, the system
’s display will turn on and your system
will begin to execute the Power On Self Test or POST to check if all
system components are running properly. Any error found during the
test will be displayed on the screen.
After the test, the screen will also display a message " press <F2> to
enter SETUP
". You don’t need to run this program at the moment as
your dealer already made the necessary settings for your computer
optimal operation.
After the test has completed, your computer will start to search and
boot up the operating system from your hard drive.
2.2.4.Connecting the keyboard and mouse
Before setting up the system, please make sure the following items are
available.

Keyboard

Mouse (for system software installation)
A keyboard is an input device; a mouse is a pointing device. Please
connect these two devices as graphics shown below to interact with
your system.