UBI EasyCoder 201 II E
UBI EasyPak 201 IIE – Getting Started
10
LOAD PAPER
The UBI EasyCoder 201 IIE printer lets you print and
feed out labels or tickets in two ways.You can either
feed out the paper web and tear it off, or you can let the
printer separate (dispense) the label from the backing
paper.
❏
Tear-Off
1
Lift the green printhead lever
counter-clockwise.
2
Fit a new paper roll on the paper supply
spool.
3
Thread paper as shown in the picture.
4
Adjust the green ring to guide paper.
5
Turn the printhead lever clockwise.
6
Feed out at least one label. To tear off
paper, pull it downwards.
❏
Peel-Off
1
Lift the green printhead lever
counter-clockwise.
2
Fit a new paper roll on the paper supply
spool.
3
Thread paper as shown in the picture.
4
Remove the labels from the first 25
cm (10") of the paper web. Wrap the
backing paper around the print roller
and dispenser shaft. Then thread it
under the print mechanism and to the
backing paper take-up.
5
Wind up the backing paper at least half a
turn manually on the backing paper take
up. Secure the backing paper using the
green clips.
6
Adjust the green ring to guide paper.
7
Turn the printhead lever clockwise.
8
Feed out at least one label.
