UBI EasyCoder 601 – Installation Instruction
5
PAPER CUTTER KIT, cont'd.
Step-by-Step Instructions,
cont'd.
❑
Put back the power cord and switch on power. The cutter will
perform an idle cycle in order to occupy its home position.
Switch off the power again.
❑
Tilt down the cutter and thread the paper through the cutter unit
between the guide plates.
❑
Tilt up the cutter again and lock it in closed position. Make sure
the printhead is lowered, close the right-hand door and switch on
the power. Now the printer is ready for operation.
F1
F2
F3
F4
F5
Pause
Setup
Feed
Enter
7
8
9
4
5
6
1
2
3
.
0
C
Power
Ready
Error
Load
IMPORTANT PRINTHEAD AND RIBBON INFORM
A
The use of any thermal transfer ribbons, other than those supplied by UBI, will invalida
t
the printhead warranty.
UBI thermal transfer ribbons are engineered specifically for th
i
The quality of thermal and thermal transfer media supplies in this printer is also of gr
e
for the quality of printing bar codes and a long life of the printhead. UBI has careful
ly
paper we recommend/provide to the needs of this printer. We therefore strongly
ad
only UBI recommended/provided supplies to ensure a high quality printing.
TEAR-OFF
CAUTION!
Do not open the cutter while the
power is on!
