（
16
）
Fix one side of suspender (O) onto hook (Q), the other side onto middle beam (F,) then cover hook (Q) with bib
(X). (Fig.16)
(17) Place swing cushion (W) and bolster (T), big pillow (U) small pillow (V) on the seat and back.
(18) Spread the large canopy (S) fully.
(19) Secure the post 1 (E1), post 2 (E2), post 3 (E3), post 4 (E4), using nails (II) to fasten the product. (Fig.19)
(20) Fasten latch (P) and side rail (H) with bolts (HH). (Fig.20)
Maintenance:
1. This swing bed is not a permanent structure and should be disassembled & stored away after use.
2. Do not repack your swing bed until it is completely dry.
3. This swing bed must be assembled by two adults or more.
4. This swing bed must not be left erect in high wind conditions.
Made in China
Step 5:
