1
2
VERY IMPORTANT
Do not install and use your portable air conditioner unit
before carefully reading this instruction manual.
Please keep this manual for product warranty and future
reference.
SAFETY PRECAUTIONS
1. DO NOT BLOCK VENTILATION! Please make sure the inlet and outlet
ventilation openings are free at all times.
2. Operate this unit on a horizontal surface to avoid water leakage.
3. Do not operate this unit where explosive or corrosive products or fumes are
present.
4. Minimum ambient temperature is 15 °C (60 °F) and maximum ambient temperature is 32 °C
(90 °F).
5. Clean the air filter periodically to maximize cooling efficiency.
6. When the unit shuts off, please wait at least 3 minutes before restarting it.
This is to prevent the compressor from being damaged.
7. This unit needs at least 16 Amps of electricity to operate the compressor.
To avoid a household electricity black-out, please do not use an extension cord for this unit.
8. This unit is for indoor operation only.
9. If the unit overheats, the fan will operate but the compressor will start after
three minutes.
●
When switching to the heating function from the other modes, the heating indicator light
will flash for 3.5 minutes before the compressor and fan start up.
10. If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid hazards.
11. If the remote control won’t be used for an extended period of time, please remove
batteries to avoid leakage. Batteries must also be removed from the
remote before disposal.
12. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they are under supervision or have received instruction regarding the use
of the appliance by a person responsible for their safety. Children should be supervised to
ensure that they do not play with the appliance.
ATTENTION
：
For effective cooling & heating functions, please
ensure that the following steps are followed:
1) Extend the exhaust hose to a maximum length
of
40 cm.
The exhaust hose must be kept
parallel and must not be bent up or down.
2)
A minimum distance
of 50 cm must be kept
between the filter side of the unit and the wall.
