Page 5
4.4. Turn the thermostat knob fully in a clockwise direction to the maximum setting.
4.5. Turn on the heating elements by turning the rotary switch at the front of the heater.
There are three setting as: Fig. 2
‘ ------ Cool air blowing
‘ 1 ’ ------ Warm air blowing with power (750W)
‘ 2 ’ ------ Hot air blowing with power (1500W)
4.6. When the desired room temperature has been reached, the thermostat will turn off.
But will turn on again after the temperature drop to keep the air temperature in the
room at the set temperature point automatically.
To find the best temperature: First turn the dial clockwise to maximum position. As soon as
the temperature is comfortable, turn the dial anti-clockwise (towards the minimum position)
slowly until the heater goes off - that is your desire setting position. The heater will be on
and off automatically at this point to maintain your desire room temperature.
4.7. In its minimum position by turning fully counter-clockwise (depending on the size of
the room), the heater will maintain the temperature above freezing to avoid the
temperature dropping under approx. +5
°
C.
5. Safety features
Pilot light
This appliance has a pilot light to indicate this appliance is
switched on. When you are not using the heater, switch off
and unplug it.
Overheating protection
The appliance has an internal over-temperature safety
device, which automatically switches the heater off the
unit overheats. Should this happen, simply unplug the
appliance and wait until the unit cools off. Then you can
switch it on again.
