3
- / + button
● Pr or - button once will increase or decrease set temperature by 1°F(°C).
Hold + or - button for 2s, set temperature on remote controller will change quickly.
Release the button after your required set temperature is reached.
● When setting
T
imer On or
T
imer Off, press + or - button to adjust the time.(See
TIMER Button for setting details)
4
FAN button
This button is used for setting Fan Speed in the sequence that goes from AUTO,
5
I FEEL button
NOTE: Your model of air conditioner has 3 speeds.
, , , to then back to Auto.
Auto
Speed 1
Speed 2
Speed 3
Speed 4
Each time you press the button, a mode is selected in a sequence that goes from
AUTO, COOL, SAVE, FAN and DRY, as follows:
COOL
AUTO
DRY
FAN
SAVE
2
MODE button
Press this button is to activate "I FEEL" function. Under this function, the sensor
in remote control will send the temperature around the remote to the unit every
10min, and the unit will cycle to reach the temperature
sent by the remote. Press this button again to turn off this function.
Operation Guide
6
SLEEP button
Press this button to activate Sleep Mode. Within 2 hours after Sleep Mode is acti-
vated, set temperature will be increased by 1
℃
/2 per hour. For the entire night
under Sleep Mode, set temperature
will increase
by 2
℃
/4 . Press this button again
to turn off the Sleep Mode. Sleep Mode is available in Cool, Energy saving and Dry
modes.
°F
°F
22
