INSTALLATION INSTRUCTIONS
Installation in a double-hung sash
window
1. Cut the foam seal (adhesive type) to the proper length and
length of the window slider kit according to the width of
window, shorten the adjustable window kit if the width of
inches.
Open the window sash and place the window slider kit on
3. Cut the foam seal (adhesive type) to the proper length
and attach it on the top of the window. See Fig.12
4. Close the window sash securely against the window.
5. Cut the foam seal to an appropriate length and seal the
open gap between the top window sash and outer window
sash. See Fig.13.
Foam seal A
(adhesive type)
Foam seal
Fig.10
Fig.11
Fig.12
Fig.13
Window kit
Window kit
9
~
22.1
38???.?6
window is less than 22.1
Window sill
Window sill
attach it to the window sill. Fig.10
2. Attach the window slider kit to the window sill. Adjust the
the window sill. Fig.11
