Page
17
Step 10
G
G1
C1
P1
V
Y1
P1
V
V
P1
F
F1
D1
D
J1
J
10.1. Attach a Connector (P1) to each end of the Lintels (F1 & F) and (G & G1) and to the end of the
Rails (D /D1) with the Screws (V).
10.2. Put the Roof Holder Bars (J & J1) onto the Connectors (P1) which are installed at the ends of the
Lintels (G & G1). Place Screws in the center of the Roof Holder Bars (J & J1) into the holes of the
Connectors, and tighten in place with Nuts (Y1).
10.3. Attach the Roof Holder Bars (J & J1) by passing Screws (V) through the holes on the top of
Connectors (P1).
NOTE:
The Long Screws (W1) previously inserted on the Roof Holder Bars (J & J1) will be used in Step 14.
