FIGURE 1
25
#12 BOLT M6*25
FIGURE 2
PAGE 2 OF 7
Attention:
Make sure that each bolt needed for
all steps match the corresponding
figure to ensure proper assembly.
Step 1:
Fasten one short support (#3) to the
legs (#1 and #2) by using bolts (#12)
and washers (#15). Tighten all the
bolts. Complete the same procedure
for the remaining short support (#3)
and legs (#1 and #2). See Figure 1.
NOTE:
1. The labels marked “1” and “2” and
the labelled arrows on the legs
(#1 and #2) should coincide with
Figure 1 to ensure proper
assembly.
2. Make sure the arcs of the short
supports (#3) are facing down.
Step 2:
Fasten the longer supports (#4) to
the legs (#1 and #2) by using bolts
(#12) and washers (#15). Tighten
all the bolts. See Figure 2.
NOTE:
Make sure the arcs of the longer
supports (#4) are facing down.
25
#12 BOLT M6*25
